Sedation Dentistry Gladeview

Decayed tooth enamel and gums are common problems among children and older people living in Gladeview. Traditional dentistry used enamel scissors, drills, rotary tools and cleaning brushes to treat these problems. There are two types of devices that are currently used in dentistry to remove decay from teeth, one is the Dental Drill and the other is the Dental Laser.

Cheap Dental Plans

Dental drill or drill dentistry is the most common and traditional technology used by dentists in Gladeview. This device uses hard metal alloy bits. These metal bits are available in various shapes and sizes as a useful attachment for different applications. Most of them are made with steel within tungsten carbide coating. Earlier dentist drills were slow in speed – around 3000 rpm – but today’s drills are much more advanced and can rotate at 800,000 rpm. But these drills can give you chills and cold sweats as they make physical contact with your teeth. This technique is not very comfortable but it’s also not too costly. The dental drill is still an essential part of every dentist’s equipment. Some high-speed dental drills may cause a smudge layer, which is a layer of dead organic material.

The latest technology used in dentistry is the ‘Laser’. A Laser is a device that emits energy in the form of amplified light. This amplified light is used to cut tissue and teeth. This light is transmitted at different wavelengths for different targets including enamel, gum tissue, decayed teeth, and whitening enhancement. Laser dentistry is an FDA (Food and Drug Association) approved technology and it has also received ADA (American Dentist Association) seal of acceptance, which assures the safety of this technology. Most dentists use lasers only for tooth decay, gum problems, and lesion removal. Lasers can also be used to detect cavities. NASA Langley research center has stated that two major wavelengths for dentists can be produced using the same hardware resulting reduced cost and complexity. Waterlase laser is the first laser approved by FDA for cutting hard tissue.

The major advantage of a dental laser compared to a dentist drill is that it causes no vibration and no pain. It does not require any anesthesia. It can target a specific portion without disturbing the surrounding area. Bleaching and swelling are also reduced and the patient feels comfortable and at ease. Currently lasers are used for recon-touring or re-shaping gums. Dental lasers are quite safe and are an effective procedure for treating dentistry in children and adults.

Affordable Dentist

No doubt, laser dentistry offers numerous important improvements over the dentist drill and also eliminates the common complaints of traditional dentistry. But laser dentistry has some disadvantages. For example, laser dentistry may not be used for teeth where previous filling has been done. It also cannot be used to fill cavities located between teeth, or shape or polish the filling. Laser is also not suited for large cavities that need to be prepared for a crown. Even though laser dentistry has some limitations it is by far the best dentistry for a patient’s comfort. As per a patient’s condition and requirements, your dentist can help you choose which is best for you.

Gladeview

Dental Implant Procedure - What To Know

Cheap Dental Plans

The technical term for orthodontic dental and facial irregularities is malocclusion, which literally means 'bad bite.' Malocclusion involves the misalignment of the teeth and jaws and/or an incorrect relationship between the upper and lower dental arches. Malocclusion can be dental, where the teeth aren't lined up properly and skeletal, which occurs when the upper and lower jaws do not line up correctly.

The way the teeth fit together is extremely important in how well teeth work and can affect appearance and self-esteem and the health of the teeth, digestion, and overall health. Because of the pressure the jaws can put on the teeth, misaligned teeth can also cause chronic pain and soreness. The most common causes of malocclusion are too much or not enough room in the jaw (or jaws) for the teeth.

The father of modern orthodontics, Edward Hartley Angle, created the classifications of malocclusion, based on the placement of the first molars. Malocclusions are divided mainly into three types: Class I, Class II and Class III.

In Class I malocclusion, the relationship of the first molars is normal and the upper and lower jaws are in a normal relationship to each other, but the other teeth are crowded, irregularly spaced, or overlapped. Crossbites and rotations can occur in severe cases of Class I malocclusion. In Class II malocclusion, the lower molars fit the upper molars, but are not in correct position. The bottom jaw grows into a more backward position than normal. This causes the top teeth to protrude over the bottom teeth. This excessive protrusion of the upper front teeth, commonly called 'buck teeth,' is the most common Class II orthodontic problem.

Class III malocclusion occurs when the lower molars are too far forward and don't fit into the upper molars. The lower jaw grows into a forward position, protruding out beyond the upper teeth. Class III orthodontic problems are usually the most complicated and difficult type of malocclusion to correct.

Malocclusion can range from mild to severe. Most people have some degree of malocclusion, and some people even have different classes of malocclusion on the left and right sides. For most people, bad bites aren't serious enough to require orthodontic treatment, but in those with moderate to severe conditions, eating and/or speaking can be negatively affected. Children and adults who have moderate to severe malocclusions need orthodontic treatment, perhaps even surgical treatment, to straighten their teeth and improve their quality of life.

What Is Involved in Preventative Dentistry?

Mini Dental Implants

Has your dentist recommended a periodontist, and have you wondered, periodontists - what do they do? A periodontist is a dentist. This dentist specializes in the field of periodontal disease, also known as gum disease. You can be sure that they are very qualified. As well as attending college and dental school, they are required to spend three more years in college obtaining a degree in this area of expertise.

When you first see a new periodontist at the request of your regular dentist, he or she will want to evaluate the condition of your teeth and gums. They also will want to check to see how far the gum disease has progressed. The next thing they will generally do is to have the dental hygienist clean your teeth. You will also be instructed on the necessity of good and proper dental hygiene in order to maintain good health.

Scaling is a procedure which is used by your periodontist to remove as much plaque buildup as they can manually. This is also used to reduce pocketing created by gum disease. In some cases when the illness is not greatly progressed, this procedure will be enough combined with proper dental hygiene in order to stop the progression of the periodontal disease.

A periodontist has the capability of performing dental surgery. If your gum disease has advanced to the stage where it is necessary, they may decide to use a surgical procedure in order to remove plaque which has built up below the gum line.

Your periodontist, more so than your regular dentist has the main goal of helping you to keep your gums healthy throughout your lifetime. These highly skilled professionals out there to help you. If you want to extend the life of your teeth, you will certainly want to follow their advice.


Miami, FL Porcelain Veneers