Affordable Dental Care Cooper City

Decayed tooth enamel and gums are common problems among children and older people living in Cooper City. Traditional dentistry used enamel scissors, drills, rotary tools and cleaning brushes to treat these problems. There are two types of devices that are currently used in dentistry to remove decay from teeth, one is the Dental Drill and the other is the Dental Laser.

Dental Dentures

Dental drill or drill dentistry is the most common and traditional technology used by dentists in Cooper City. This device uses hard metal alloy bits. These metal bits are available in various shapes and sizes as a useful attachment for different applications. Most of them are made with steel within tungsten carbide coating. Earlier dentist drills were slow in speed – around 3000 rpm – but today’s drills are much more advanced and can rotate at 800,000 rpm. But these drills can give you chills and cold sweats as they make physical contact with your teeth. This technique is not very comfortable but it’s also not too costly. The dental drill is still an essential part of every dentist’s equipment. Some high-speed dental drills may cause a smudge layer, which is a layer of dead organic material.

The latest technology used in dentistry is the ‘Laser’. A Laser is a device that emits energy in the form of amplified light. This amplified light is used to cut tissue and teeth. This light is transmitted at different wavelengths for different targets including enamel, gum tissue, decayed teeth, and whitening enhancement. Laser dentistry is an FDA (Food and Drug Association) approved technology and it has also received ADA (American Dentist Association) seal of acceptance, which assures the safety of this technology. Most dentists use lasers only for tooth decay, gum problems, and lesion removal. Lasers can also be used to detect cavities. NASA Langley research center has stated that two major wavelengths for dentists can be produced using the same hardware resulting reduced cost and complexity. Waterlase laser is the first laser approved by FDA for cutting hard tissue.

The major advantage of a dental laser compared to a dentist drill is that it causes no vibration and no pain. It does not require any anesthesia. It can target a specific portion without disturbing the surrounding area. Bleaching and swelling are also reduced and the patient feels comfortable and at ease. Currently lasers are used for recon-touring or re-shaping gums. Dental lasers are quite safe and are an effective procedure for treating dentistry in children and adults.

24 Hour Emergency Dentist

No doubt, laser dentistry offers numerous important improvements over the dentist drill and also eliminates the common complaints of traditional dentistry. But laser dentistry has some disadvantages. For example, laser dentistry may not be used for teeth where previous filling has been done. It also cannot be used to fill cavities located between teeth, or shape or polish the filling. Laser is also not suited for large cavities that need to be prepared for a crown. Even though laser dentistry has some limitations it is by far the best dentistry for a patient’s comfort. As per a patient’s condition and requirements, your dentist can help you choose which is best for you.

Cooper City

The Need For an Orthodontic Specialist

Mini Dental Implants

Has your dentist recommended a periodontist, and have you wondered, periodontists - what do they do? A periodontist is a dentist. This dentist specializes in the field of periodontal disease, also known as gum disease. You can be sure that they are very qualified. As well as attending college and dental school, they are required to spend three more years in college obtaining a degree in this area of expertise.

When you first see a new periodontist at the request of your regular dentist, he or she will want to evaluate the condition of your teeth and gums. They also will want to check to see how far the gum disease has progressed. The next thing they will generally do is to have the dental hygienist clean your teeth. You will also be instructed on the necessity of good and proper dental hygiene in order to maintain good health.

Scaling is a procedure which is used by your periodontist to remove as much plaque buildup as they can manually. This is also used to reduce pocketing created by gum disease. In some cases when the illness is not greatly progressed, this procedure will be enough combined with proper dental hygiene in order to stop the progression of the periodontal disease.

A periodontist has the capability of performing dental surgery. If your gum disease has advanced to the stage where it is necessary, they may decide to use a surgical procedure in order to remove plaque which has built up below the gum line.

Your periodontist, more so than your regular dentist has the main goal of helping you to keep your gums healthy throughout your lifetime. These highly skilled professionals out there to help you. If you want to extend the life of your teeth, you will certainly want to follow their advice.

Five Reasons to Choose an Orthodontist

Implant Dentures

Dental implants are what dentists use to replace missing teeth or a tooth. There are two types of regular implants, which are:

• Subperiosteal-this implant is placed on top of your jaw and the metal framework protrudes through your jaw to hold the tooth, or teeth. This type of implant is for those that are unable to wear dentures and have minimal bone height.
• Endosteal-this type of implant is fixed into the bone with blades, cylinders, and screws. This kind of implant is for patients who have removable dentures or bridgework.

There are also mini dental implants, which are prosthetic teeth that are similar to regular dental implants but smaller. These implants are usually used as a solution to replacing the patient's missing incisors or front teeth.

Having dental implant surgery will require surgery so the dentist can place the dental implants inside your jawbone. These are what functions as the roots for your missing tooth or teeth. Once the jawbone fuses with the metal in the implants they will remain secure, does not make any noise, and no damage to your jaw burn.

Who benefits

• Patients who have a jawbone that is fully grown
• Have enough bone to support the implant
• Patients who have healthy oral tissues
• Who does not have any health problems that will interfere with the healing of the bone

One important thing to remember is that when you have such a surgery it is not a one or two visit procedure. The process can require several months of dental visits before the process is complete.

Dental implant surgery procedure

In order to help control the pain a form of anesthesia is given to the patient. The anesthesia can be sedation, general, or local anesthesia. Once the patient is feeling no pain the dentist will cut open their gum to expose the bone. To create a hole in the bone the dentist will use a drill, and then the dental implant cylinder is put in the opening. This will function as the root for the dental implant. Once the cylinder is placed in the hole the jawbone will fuse with it. This process can take from two to six months to complete. After enough time has passed, the gum will be reopened to expose the implant.

An abutment will be attached to the implant at this time and the gum tissue around the abutment is closed. The gums are allowed to heal for a couple of weeks and then the dentist will make impressions of any natural teeth and your mouth so they can create crowns or artificial teeth. The artificial teeth are then attached to the abutment.


Hollywood, FL Full Dental Implants

Cosmetic Dentistry Cooper City

Decayed tooth enamel and gums are common problems among children and older people living in Cooper City. Traditional dentistry used enamel scissors, drills, rotary tools and cleaning brushes to treat these problems. There are two types of devices that are currently used in dentistry to remove decay from teeth, one is the Dental Drill and the other is the Dental Laser.

Denture Dentist

Dental drill or drill dentistry is the most common and traditional technology used by dentists in Cooper City. This device uses hard metal alloy bits. These metal bits are available in various shapes and sizes as a useful attachment for different applications. Most of them are made with steel within tungsten carbide coating. Earlier dentist drills were slow in speed – around 3000 rpm – but today’s drills are much more advanced and can rotate at 800,000 rpm. But these drills can give you chills and cold sweats as they make physical contact with your teeth. This technique is not very comfortable but it’s also not too costly. The dental drill is still an essential part of every dentist’s equipment. Some high-speed dental drills may cause a smudge layer, which is a layer of dead organic material.

The latest technology used in dentistry is the ‘Laser’. A Laser is a device that emits energy in the form of amplified light. This amplified light is used to cut tissue and teeth. This light is transmitted at different wavelengths for different targets including enamel, gum tissue, decayed teeth, and whitening enhancement. Laser dentistry is an FDA (Food and Drug Association) approved technology and it has also received ADA (American Dentist Association) seal of acceptance, which assures the safety of this technology. Most dentists use lasers only for tooth decay, gum problems, and lesion removal. Lasers can also be used to detect cavities. NASA Langley research center has stated that two major wavelengths for dentists can be produced using the same hardware resulting reduced cost and complexity. Waterlase laser is the first laser approved by FDA for cutting hard tissue.

The major advantage of a dental laser compared to a dentist drill is that it causes no vibration and no pain. It does not require any anesthesia. It can target a specific portion without disturbing the surrounding area. Bleaching and swelling are also reduced and the patient feels comfortable and at ease. Currently lasers are used for recon-touring or re-shaping gums. Dental lasers are quite safe and are an effective procedure for treating dentistry in children and adults.

24 Hour Emergency Dentist

No doubt, laser dentistry offers numerous important improvements over the dentist drill and also eliminates the common complaints of traditional dentistry. But laser dentistry has some disadvantages. For example, laser dentistry may not be used for teeth where previous filling has been done. It also cannot be used to fill cavities located between teeth, or shape or polish the filling. Laser is also not suited for large cavities that need to be prepared for a crown. Even though laser dentistry has some limitations it is by far the best dentistry for a patient’s comfort. As per a patient’s condition and requirements, your dentist can help you choose which is best for you.

Cooper City

Invisalign Braces

Affordable Dental Insurance

Braces and orthodontics are mainly associated with teens or adults looking to correct teeth and jaw misalignment for personal and professional reasons. But, for many individuals the best time to seek orthodontic treatment isn't in adolescence or adulthood, but in childhood.

Early childhood orthodontic treatment allows parents to circumvent their child's tooth misalignments before they develop or at least lessen the severity of misalignments. According to Dentists' studies, the optimal age for an orthodontic evaluation is at the age of seven. This is the general age where the first molars and incisors surface, which allows orthodontists to determine if there will be misalignments.

Between the ages of seven through eleven, the jaw and mouth is still growing and forming. This gives orthodontists an edge as the treatment is actually preventative interception rather than alteration of established misalignments.

Benefits

Childhood orthodontics, or interceptive orthodontics, can often be less invasive and even less painful than treatment for older age groups. Often, when orthodontists work on older patients, correcting problems such as overbites, underbites, crossbites, and crowding requires tooth extraction to provide room for adjustments. In treating a child, however, the jaw and teeth aren't in fixed positions, allowing orthodontists to proactively mold the teeth and jaw into optimal positioning without pulling teeth.

According to studies, when treating children, orthodontists will often use a palatal expander to widen the upper dental arch. Though this sounds painful, it provides the space needed for adult teeth to emerge in an aesthetically sound position without the trauma of pulling teeth.

The American Academy of Pediatric Dentistry (AAPD) states that while interceptive orthodontics provides space for adult teeth to properly emerge; the teeth and jaw may still develop misalignments.

Braces or Invisalign?

The "braces versus Invisalign" argument is well documented throughout dental Web sites and various other information sources. But, this debate often changes depending upon the type of patient, and this is ever more true when considering orthodontics for children.

Dentists believe that when choosing the right treatment, the decision should start with knowing your child. There are several options out there, from traditional braces to invisible braces to Invisalign, but the success of any of these options depends solely on the child's comfort levels and sense of responsibility.

In addition, Invisalign are removable trays that are worn at all times except during meals. These require high levels of responsibility as they are easy to lose or break. Also, if the child can't handle the discomfort of adjustments, he or she may be tempted to take out the trays, which prolongs treatment and affects the final results of treatment.

Braces are a series of metal brackets and wires that fasten directly to the teeth. Braces gradually move teeth with a series of adjustments made by orthodontists. These benefit child patients as they can't be removed, but can be embarrassing at times.

Some kids like choosing their own color bands for their braces. But other kids feel uncomfortable wearing braces. Parents need to recognize this and work with their children just as much as their orthodontist. There are options, thankfully, and kids and parents can both walk away with the right equipment and the right mindset going into treatment.

Eating habits and hygiene are other areas to consider notes. Some hard foods and candy can damage orthodontic equipment, and without diligent cleaning, braces and Invisalign can build up bacteria, which will create problems such as cavities and plaque buildup.

Treatment

Treatment time for interceptive orthodontics varies per patient depending on the amount of care needed. Generally, braces and Invisalign take approximately the same amount of time to correct misalignments, with Invisalign taking a slight edge.

Parents considering orthodontics for their children should consult an orthodontist for an evaluation. The orthodontist can then determine if orthodontics is needed, and when the best age for treatment would be.

I Want to Be Sedated - Sedation Dentistry

Low Cost Dental

Dental implants are what dentists use to replace missing teeth or a tooth. There are two types of regular implants, which are:

• Subperiosteal-this implant is placed on top of your jaw and the metal framework protrudes through your jaw to hold the tooth, or teeth. This type of implant is for those that are unable to wear dentures and have minimal bone height.
• Endosteal-this type of implant is fixed into the bone with blades, cylinders, and screws. This kind of implant is for patients who have removable dentures or bridgework.

There are also mini dental implants, which are prosthetic teeth that are similar to regular dental implants but smaller. These implants are usually used as a solution to replacing the patient's missing incisors or front teeth.

Having dental implant surgery will require surgery so the dentist can place the dental implants inside your jawbone. These are what functions as the roots for your missing tooth or teeth. Once the jawbone fuses with the metal in the implants they will remain secure, does not make any noise, and no damage to your jaw burn.

Who benefits

• Patients who have a jawbone that is fully grown
• Have enough bone to support the implant
• Patients who have healthy oral tissues
• Who does not have any health problems that will interfere with the healing of the bone

One important thing to remember is that when you have such a surgery it is not a one or two visit procedure. The process can require several months of dental visits before the process is complete.

Dental implant surgery procedure

In order to help control the pain a form of anesthesia is given to the patient. The anesthesia can be sedation, general, or local anesthesia. Once the patient is feeling no pain the dentist will cut open their gum to expose the bone. To create a hole in the bone the dentist will use a drill, and then the dental implant cylinder is put in the opening. This will function as the root for the dental implant. Once the cylinder is placed in the hole the jawbone will fuse with it. This process can take from two to six months to complete. After enough time has passed, the gum will be reopened to expose the implant.

An abutment will be attached to the implant at this time and the gum tissue around the abutment is closed. The gums are allowed to heal for a couple of weeks and then the dentist will make impressions of any natural teeth and your mouth so they can create crowns or artificial teeth. The artificial teeth are then attached to the abutment.


Hollywood, FL Full Dental Implants

Dentist Braces Cooper City

Decayed tooth enamel and gums are common problems among children and older people living in Cooper City. Traditional dentistry used enamel scissors, drills, rotary tools and cleaning brushes to treat these problems. There are two types of devices that are currently used in dentistry to remove decay from teeth, one is the Dental Drill and the other is the Dental Laser.

Dental Cosmetics

Dental drill or drill dentistry is the most common and traditional technology used by dentists in Cooper City. This device uses hard metal alloy bits. These metal bits are available in various shapes and sizes as a useful attachment for different applications. Most of them are made with steel within tungsten carbide coating. Earlier dentist drills were slow in speed – around 3000 rpm – but today’s drills are much more advanced and can rotate at 800,000 rpm. But these drills can give you chills and cold sweats as they make physical contact with your teeth. This technique is not very comfortable but it’s also not too costly. The dental drill is still an essential part of every dentist’s equipment. Some high-speed dental drills may cause a smudge layer, which is a layer of dead organic material.

The latest technology used in dentistry is the ‘Laser’. A Laser is a device that emits energy in the form of amplified light. This amplified light is used to cut tissue and teeth. This light is transmitted at different wavelengths for different targets including enamel, gum tissue, decayed teeth, and whitening enhancement. Laser dentistry is an FDA (Food and Drug Association) approved technology and it has also received ADA (American Dentist Association) seal of acceptance, which assures the safety of this technology. Most dentists use lasers only for tooth decay, gum problems, and lesion removal. Lasers can also be used to detect cavities. NASA Langley research center has stated that two major wavelengths for dentists can be produced using the same hardware resulting reduced cost and complexity. Waterlase laser is the first laser approved by FDA for cutting hard tissue.

The major advantage of a dental laser compared to a dentist drill is that it causes no vibration and no pain. It does not require any anesthesia. It can target a specific portion without disturbing the surrounding area. Bleaching and swelling are also reduced and the patient feels comfortable and at ease. Currently lasers are used for recon-touring or re-shaping gums. Dental lasers are quite safe and are an effective procedure for treating dentistry in children and adults.

Best Implant Dentist

No doubt, laser dentistry offers numerous important improvements over the dentist drill and also eliminates the common complaints of traditional dentistry. But laser dentistry has some disadvantages. For example, laser dentistry may not be used for teeth where previous filling has been done. It also cannot be used to fill cavities located between teeth, or shape or polish the filling. Laser is also not suited for large cavities that need to be prepared for a crown. Even though laser dentistry has some limitations it is by far the best dentistry for a patient’s comfort. As per a patient’s condition and requirements, your dentist can help you choose which is best for you.

Cooper City

Dental Care - Qualities of a Good Dentist

Low Cost Dental Care

Invisalign is a great way to straighten your teeth without the annoying metal wires, or dental brackets. Invisalign is also known as invisible braces, clear braces, or adult orthodontics. Over a million people around the world have experienced the benefits of Invisalign and the number keeps growing. In the United States, over 70% of orthodontists are certified to treat their patients with Invisalign.

The treatment of Invisalign consists of a series of aligners that you will need to switch in an average of every two weeks. Obviously, your Invisalign treatment is custom made and only effective for your teeth. Each one of the aligners is individually designed to calculate the strength needed to gradually move your teeth into the position they need to be.

If you are in the area of Texas, you can find a lot of Invisalign Austin orthodontics that can help you with your own personal treatment. Once you start your treatment in your area, you will have to start wearing your aligners. Remember that you can only remove them to brush and floss your teeth; you can also remove them to eat and drink.

When you remove your aligners every two weeks, you will help them to move your teeth gradually until they are straight and reach the final position that your Austin Invisalign doctor decided. So, if you're looking for an Austin Invisalign provider, there are several places to look for the perfect provider for you. Just make sure to choose your provider from a list of top Invisalign Austin orthodontics to get the best out of your treatment.

Make sure to set a series of visits to your Invisalign specialist at least once in about every month and a half. This way, you can rest assured that your treatment is working according to plan, and there won't be any delays on the process. If everything goes as planned, the average time of treatment that you'll have to experience will be from 9 to 15 months. If you're wondering the number of aligners worn during this period of time, the number is between 18 and 30 aligners on average, but that goes according to your plan.

Always look for any Invisalign Premier Provider. Premier providers need to achieve certain level of experience in order to earn the title of premier provider. Try to visit any Invisalign premier provider to take advantage of this great orthodontic treatment.

Five Reasons to Choose an Orthodontist

Implant Dentures

Dentists are oral health care practitioners who study long and hard before becoming certified to practice dentistry. Four years of undergraduate school must be accomplished with a high GPA before even applying to dental college.

To become admitted into this grad program, an applicant must be a cream-of-the-crop individual. High grades, entrance exams, personal interviews and more will be thrown into the decision making mix. Competition to get in is stiff indeed. Once these future docs are enrolled, the rigorous years continue. Years of academic classroom training along with hands-on clinical experience must be accomplished before the initials DDS are earned. DDS stands for doctor of dental surgery. These individuals are as well trained as a regular medical physician. Here are some of the subjects that they study:

- Tooth composition: A tooth is made up of three main parts. These parts are 1) the enamel, 2) the dentine, and 3) the pulp. The enamel covers the inner workings and is made up of hard, durable white material. The dentine is sometimes referred to as the core and lies directly beneath the enamel. The pulp is the portion filled with nerves and blood vessels.

- Anatomy, physiology and chemistry: Not only the tooth is studied, however. A dentist needs to know how the entire human body works in terms of muscles, blood systems, skeletal structures and chemical reactivity.

- Medications: A DDS needs to study pharmaceuticals and how they affect patients. Dentists use a wide variety of medications in their work and need to be well versed in pharmaceuticals. They prescribe pain meds, antibiotics, anti-inflammatory drugs and more. Nitrous oxide is also known as "laughing gas" and is a prescribed drug. This is often used during procedures in order to relax nervous patients.

- Current trends in procedures: The practitioner must be up on the latest materials and methods for everything from filling a cavity to performing a root canal. Dental implants, orthodontia, cosmetic or pediatric dentistry and the base of knowledge are constantly being updated.

- Office management: Many DDSs own their own private practice. In order to run a practice, the doc must know all about good business practices. This includes bookkeeping, hiring and firing, employee compliance and more. Not only must this professional be science brained, he or she must be business brained, as well.

- Marketing: Businesses must be properly marketed in order to be successful. A dentist will have to know all about marketing, advertising and getting the good news out about their expertise to the community.

- CERES technology: CERES stands for ceramic restoration. Dental practitioners are learning about this cutting edge 3D design imaging for instant procedures. A computer program is connected to a milling tool which is connected to a special camera. These programs work together to create reconstructive products within minutes. Many dentists are studying about this new procedure in order to offer it to their patients.

Dentists must go to school for many years to obtain expertise. When an individual has earned the DDS initials, patients can rest assured that their doc is a pro.


Hollywood, FL Full Dental Implants

Implant Dentistry Cooper City

Decayed tooth enamel and gums are common problems among children and older people living in Cooper City. Traditional dentistry used enamel scissors, drills, rotary tools and cleaning brushes to treat these problems. There are two types of devices that are currently used in dentistry to remove decay from teeth, one is the Dental Drill and the other is the Dental Laser.

Dental Cosmetics

Dental drill or drill dentistry is the most common and traditional technology used by dentists in Cooper City. This device uses hard metal alloy bits. These metal bits are available in various shapes and sizes as a useful attachment for different applications. Most of them are made with steel within tungsten carbide coating. Earlier dentist drills were slow in speed – around 3000 rpm – but today’s drills are much more advanced and can rotate at 800,000 rpm. But these drills can give you chills and cold sweats as they make physical contact with your teeth. This technique is not very comfortable but it’s also not too costly. The dental drill is still an essential part of every dentist’s equipment. Some high-speed dental drills may cause a smudge layer, which is a layer of dead organic material.

The latest technology used in dentistry is the ‘Laser’. A Laser is a device that emits energy in the form of amplified light. This amplified light is used to cut tissue and teeth. This light is transmitted at different wavelengths for different targets including enamel, gum tissue, decayed teeth, and whitening enhancement. Laser dentistry is an FDA (Food and Drug Association) approved technology and it has also received ADA (American Dentist Association) seal of acceptance, which assures the safety of this technology. Most dentists use lasers only for tooth decay, gum problems, and lesion removal. Lasers can also be used to detect cavities. NASA Langley research center has stated that two major wavelengths for dentists can be produced using the same hardware resulting reduced cost and complexity. Waterlase laser is the first laser approved by FDA for cutting hard tissue.

The major advantage of a dental laser compared to a dentist drill is that it causes no vibration and no pain. It does not require any anesthesia. It can target a specific portion without disturbing the surrounding area. Bleaching and swelling are also reduced and the patient feels comfortable and at ease. Currently lasers are used for recon-touring or re-shaping gums. Dental lasers are quite safe and are an effective procedure for treating dentistry in children and adults.

Discount Dental

No doubt, laser dentistry offers numerous important improvements over the dentist drill and also eliminates the common complaints of traditional dentistry. But laser dentistry has some disadvantages. For example, laser dentistry may not be used for teeth where previous filling has been done. It also cannot be used to fill cavities located between teeth, or shape or polish the filling. Laser is also not suited for large cavities that need to be prepared for a crown. Even though laser dentistry has some limitations it is by far the best dentistry for a patient’s comfort. As per a patient’s condition and requirements, your dentist can help you choose which is best for you.

Cooper City

What Do Dentists Study?

Cosmetology Dentist

The technical term for orthodontic dental and facial irregularities is malocclusion, which literally means 'bad bite.' Malocclusion involves the misalignment of the teeth and jaws and/or an incorrect relationship between the upper and lower dental arches. Malocclusion can be dental, where the teeth aren't lined up properly and skeletal, which occurs when the upper and lower jaws do not line up correctly.

The way the teeth fit together is extremely important in how well teeth work and can affect appearance and self-esteem and the health of the teeth, digestion, and overall health. Because of the pressure the jaws can put on the teeth, misaligned teeth can also cause chronic pain and soreness. The most common causes of malocclusion are too much or not enough room in the jaw (or jaws) for the teeth.

The father of modern orthodontics, Edward Hartley Angle, created the classifications of malocclusion, based on the placement of the first molars. Malocclusions are divided mainly into three types: Class I, Class II and Class III.

In Class I malocclusion, the relationship of the first molars is normal and the upper and lower jaws are in a normal relationship to each other, but the other teeth are crowded, irregularly spaced, or overlapped. Crossbites and rotations can occur in severe cases of Class I malocclusion. In Class II malocclusion, the lower molars fit the upper molars, but are not in correct position. The bottom jaw grows into a more backward position than normal. This causes the top teeth to protrude over the bottom teeth. This excessive protrusion of the upper front teeth, commonly called 'buck teeth,' is the most common Class II orthodontic problem.

Class III malocclusion occurs when the lower molars are too far forward and don't fit into the upper molars. The lower jaw grows into a forward position, protruding out beyond the upper teeth. Class III orthodontic problems are usually the most complicated and difficult type of malocclusion to correct.

Malocclusion can range from mild to severe. Most people have some degree of malocclusion, and some people even have different classes of malocclusion on the left and right sides. For most people, bad bites aren't serious enough to require orthodontic treatment, but in those with moderate to severe conditions, eating and/or speaking can be negatively affected. Children and adults who have moderate to severe malocclusions need orthodontic treatment, perhaps even surgical treatment, to straighten their teeth and improve their quality of life.

Five Reasons to Choose an Orthodontist

One Day Dental Implants

Dental implants are what dentists use to replace missing teeth or a tooth. There are two types of regular implants, which are:

• Subperiosteal-this implant is placed on top of your jaw and the metal framework protrudes through your jaw to hold the tooth, or teeth. This type of implant is for those that are unable to wear dentures and have minimal bone height.
• Endosteal-this type of implant is fixed into the bone with blades, cylinders, and screws. This kind of implant is for patients who have removable dentures or bridgework.

There are also mini dental implants, which are prosthetic teeth that are similar to regular dental implants but smaller. These implants are usually used as a solution to replacing the patient's missing incisors or front teeth.

Having dental implant surgery will require surgery so the dentist can place the dental implants inside your jawbone. These are what functions as the roots for your missing tooth or teeth. Once the jawbone fuses with the metal in the implants they will remain secure, does not make any noise, and no damage to your jaw burn.

Who benefits

• Patients who have a jawbone that is fully grown
• Have enough bone to support the implant
• Patients who have healthy oral tissues
• Who does not have any health problems that will interfere with the healing of the bone

One important thing to remember is that when you have such a surgery it is not a one or two visit procedure. The process can require several months of dental visits before the process is complete.

Dental implant surgery procedure

In order to help control the pain a form of anesthesia is given to the patient. The anesthesia can be sedation, general, or local anesthesia. Once the patient is feeling no pain the dentist will cut open their gum to expose the bone. To create a hole in the bone the dentist will use a drill, and then the dental implant cylinder is put in the opening. This will function as the root for the dental implant. Once the cylinder is placed in the hole the jawbone will fuse with it. This process can take from two to six months to complete. After enough time has passed, the gum will be reopened to expose the implant.

An abutment will be attached to the implant at this time and the gum tissue around the abutment is closed. The gums are allowed to heal for a couple of weeks and then the dentist will make impressions of any natural teeth and your mouth so they can create crowns or artificial teeth. The artificial teeth are then attached to the abutment.


Hollywood, FL Full Dental Implants